FAULHABER SXR
DC-micromotors with innovative winding for higher performance as standard
The motors of the FAULHABER SXR product family set new standards in the areas of performance and versatility. Equipped with an innovative, hexagonal winding technology with high copper filling factor and high proportion of straight lines, they achieve significantly increased performance and efficiency. The DC microdrives are available in flexible voltage variants from 3 to 18 V as well as in various bearing configurations. The optimized rotor balancing ensures smooth speed control and thereby contributes to the durability of the motors.
The SXR family can be combined with a number of FAULHABER products to form a compact, diameter-compliant drive solution. Individual configuration options ranging from front and rear shaft adaptation to options for vacuum and temperature environments ensure high flexibility and suitability for use in a wide range of applications.
| Nominal voltage | 3 ... 12 V |
| Rated torque up to | 2 mNm |
| No-load speed up to | 11400 min⁻¹ |
| Stall torque up to | 6.64 mNm |
| Diameter | 12 mm |
| Length | 18.3 mm |
| Nominal voltage | 3 ... 12 V |
| Rated torque up to | 4 mNm |
| No-load speed up to | 8990 min⁻¹ |
| Stall torque up to | 15.8 mNm |
| Diameter | 12 mm |
| Length | 18.3 mm |
| Nominal voltage | 3 ... 24 V |
| Rated torque up to | 2.75 mNm |
| No-load speed up to | 10100 min⁻¹ |
| Stall torque up to | 7.43 mNm |
| Diameter | 14 mm |
| Length | 23.3 mm |
| Nominal voltage | 3 ... 24 V |
| Rated torque up to | 6.1 mNm |
| No-load speed up to | 7720 min⁻¹ |
| Stall torque up to | 21.9 mNm |
| Diameter | 14 mm |
| Length | 37 mm |
| Nominal voltage | 3 ... 24 V |
| Rated torque up to | 5.03 mNm |
| No-load speed up to | 8350 min⁻¹ |
| Stall torque up to | 16.5 mNm |
| Diameter | 16 mm |
| Length | 27 mm |